Intellitouch User Manual page 34

24
7. Setting up additional equipment (pages 53)
Configure the IntelliTouch system what special equipment the system may have installed.
• Is there an IntelliFlo pump installed?
• Is there an UltraTemp® heat pump installed?
• Is there an IntelliChlor salt chlorine generator installed?
• Is there an IntelliChem™ automatic chemical feeder installed?
• Is solar heating available? Is solar being used for a heat pump?
• What circuits will turn 2-Speed pumps to High Speed? Cool-down cycle for the heater
• Lets you set circuits that switch the filter pump to high speed - Do you want to delay turning off the filter pump
for 10 minutes when the heater is turned off?
• Do you want the spa to heat whenever the Spa button is pressed?
8. Set up Solar Equipment, 2-speed pump, Set a heater cool-down cycle (page 74)
Set up additional equipment if required such as solar equipment. Set up the chlorine generator
Set up the Indoor Control Panel to operate with optional salt chlorine generators.
9. Configuring the heater system options (page 11)
Setup gas heater, heat pump or heat pump used in combination with other heating systems.
10. Create Macros and Feature Circuits (page 80)
After the main circuits are set up, you can now combine circuits (Auxiliaries and Features) to maximize the
system capability. Feature circuits that are assigned as Macros may also have all the same Circuit Functions
and Equipment capabilities as any other circuit.
11. Configure spa-side remote (iS4, iS10, SpaCommand, QT4, QTII) buttons (page 81)
Set which circuits will be operated by which button on each remote. Once you have checked all buttons
operate properly, place labels on remote controls.
12. Set on/off times for circuit from the Program screen (pages 14-17)
Set times for automatic circuit activation. Each system may have up to 99 total programs. All user created
programs are active all the time; so check that there are not conflicting automated times.
13. Set up lights from the Lights screen (pages 42-52)
From the lighting screen you can control the pool, spa and backyard lighting, such as the color IntelliBrite LED
lights, synchronized color changing SAm, SAL lights, FIBERworks lights and MagicStream laminars.
IntelliTouch Pool and Spa Control System User's Guide