Selecting The Display Screens - Intellitouch User Manual

36
4. Continue to name other auxiliary circuits (AUX2,
AUX3, etc.): After selecting the equipment name you
want to use for AUX 1, press the button next to the
AUX 2 and choose a circuit name. The small arrow
indicates which circuit is selected for naming.
5. Repeat the process to assign the other equipment to
circuits on this screen.
6. When you have finished assigning equipment circuit
names, press the Save button.
7. Press the Exit button to return to the Main screen.

Selecting the Display Screens

There are thee (3) screens to view and setup auxiliary circuits:
• Main Screen: Displays assigned auxiliary (AUX 1, AUX 2, etc.) circuit names. An
the middle lower part of the screen indicates that the "Main Screen" is selected.
• Display #1: Displays the auxiliary (AUX 1, AUX 2, etc.) circuits connected to the main Load Center.
The number 1
#1 is selected.
• Display #2, #3, or #4: Displays the auxiliary circuits connected to additional expansion Load or
Power Centers. The number
circuits for Display #2 is selected.
• Feature: Displays auxiliary circuits configured as "Feature" circuits. The
middle lower part of the screen indicates that Feature circuits screen is selected.
To select the Display screens, press the lower right DISPLAY button to toggle through each of the screens. For
more information, see page 7.
Display button
Main screen
IntelliTouch Pool and Spa Control System User's Guide
icon located in the middle lower part of the screen indicates that circuits for Display
icon located in the middle lower part of the screen indicates that
2
Display #1, #2, #3, or #4 screen
1
icon located in
M
F icon located in the
ALL LIGHTS EDGE PUMP CLEANERS
WATER FALL
MON 4:32AM
F
AIR TEMP 92˚
DISPLAY
MENU HEAT LIGHTS
Feature circuits screen