Selecting The Heating System - Intellitouch User Manual

Selecting the Heating System

Use the heat menu settings to specify the set point temperature and select the heat source to heat the pool and
spa water. The water will begin to heat when the heater is manually switched on, by pressing the Pool, Spa
button on the Indoor Control Panel or the Valves (V) button on the Outdoor Control Panel, regardless of the
heater selection (off) in the Heat menu. The optional iS10 Spa-Side remote, iS4 Spa Side remote or
QuickTouch QT4 wireless remote can be used to switch the heater on. The IntelliTouch system supports gas,
electric and solar heating systems. IntelliTouch will use the heating source that is selected. Multiple heaters are
supported. IntelliTouch automatically selects the heating system that is most effective for the user settings. The
heat source selections are:
Getting There
HEAT
To select the heating system, press the HEAT button at the bottom of the screen.
• SPA: Press the left or right side button next to SPA MODE to select the heating mode for the spa.
• POOL: Press the left or right side button next to POOL MODE to select the heating mode for the spa.
1. Press the Set button to save the heat settings.
2. Press the Back button to return to the Main screen.
The heat options are:
• OFF - No heating even though pump and other circuits may be operating.
• HEATER - Gas heater only. When the heater is active it will continue heating the water until the heater's
current highest set point temperature triggers the heater sensor (104° F or 40° C). Do not activate the heater
without running the pump. The heater will not run if water flow is not detected.
• HEAT PUMP - Heat pump only.
• H PUMP PREF. - For when a heat pump is in combination with other heating systems and you want to use
the heat pump only when it is most effective.
SPA
Back button Set button
Press to scroll through SPA
Heating options: OFF, HEATER. If
solar is enabled (see page 74,
77) the options are HEAT PUMP,
H PUMP PREF.
Press to scroll through POOL
Heating options: OFF, HEATER. If
solar is enabled the options are
HEAT PUMP, H PUMP PREF.
IntelliTouch Pool and Spa Control System User's Guide
11