Heating Your Spa And Pool; Adjust Spa Or Pool Heat Settings - Intellitouch User Manual

10

Heating your Spa and Pool

From the Heat screen, use Spa button (left side) or Pool button (right side) to adjust the heat temperature for
your spa or pool. You can also switch the heater on or off from this screen. For single-body systems (models
i5S+3 and i9+3S), spa and pool are replaced with HI-TEMP and LO-TEMP settings (for more information
see page 7).

Adjust Spa or Pool Heat Settings

Getting There
HEAT
To adjust the spa or pool set point temperature, go to the Heat screen:
Note: Be sure the Spa Mode does not display "OFF." If "OFF" is displayed, refer to "Configuring
the Heating System Options," page 11, for more information.
To adjust the spa or pool set point temperature, press the HEAT button at the bottom of the screen:
• SPA: Press the spa Up or Down buttons (top left and right side) to raise or lower the spa water temperature.
The set point water temperature is displayed in the middle of the screen. The spa temperature setting can be
adjusted from 40° F to 104° F or (4° C to 40° C).
• POOL: Press the pool Up or Down buttons (third down from the top, left and right side) to raise or lower
the pool temperature. The set point water temperature is displayed in the middle of the screen. The pool
temperature setting can be adjusted from 40° F to 104° F or (4° C to 40° C).
1. Press the Set button to save the set point temperature settings. The current spa and pool water temperatures
are displayed on the main screen (see page 7).
2. Press the Back button to return to the Main screen.
Press to lower SPA temperature
Hi-Temp Mode for i5S and i9+3S
Press to lower POOL temperature
Hi-Temp Mode for i5S and i9+3S
IntelliTouch Pool and Spa Control System User's Guide
SPA
Back button Set button
Press to increase SPA temperature
Press to increase POOL temperature