Intellitouch User Manual page 80

70
IntelliFlo VS 3050 and VSF+SVRS Pump Setup
Assign custom speeds (RPM) or flow rates (GPM) - IntelliFlo VSF+SVRS pump only
To set the IntelliFlo VSF+SVRS pump speed or flow rate to an assigned circuit name:
5. Adjust pump speed (RPM) or flow rate (GPM):
Press the ASSIGN CUSTOM SPEEDS/FLOWS
button to access the pump circuit and speed screen.
Press the right side button next to the pump speed
(RPM) or flow rate (GPM). Use the DOWN and UP
lower buttons to adjust the speed (400-3450 RPM) or
flow rate (15-130 GPM).
6. Press the SAVE button to save the setting and return to
the previous screen.
7. Display RPM or GPM: Pump speed can be defined
on the screen as RPM or GPM (useful to determine the
daily pool filter cycle).
Toggle between RPM and GPM: To change the
display from RPM to GPM, press the ASSIGN
CUSTOM SPEEDS/FLOWS button to access the
pump circuit and speed screen. Press the button next to a
circuit that displays RPM (e.g 1110 RPM) (an indicator
arrow is displayed), then press the button next to
RPM/GPM/PSI (the display shows the GPM
equivalent (e.g. 30 GPM).
8. Adjusting the MAXIMUM PRESSURE SETTINGS (PSI) when using GPM: Press the right side
button next to the current PSI setting. Press the DOWN and UP buttons to adjust the PSI setting. Press
the SAVE button to save the setting.
Press this
button to
change RPM
to GPM
9. When finished, press the BACK button three times to return to the Equipment screen.
IntelliTouch Pool and Spa Control System User's Guide
PENTAIR IFLO VSF+SVRS #3
SETTINGS FOR NONE
RPM OR GPM 1100 RPM
MAX PRESSURE IN GPM ONLY
DISABLED
BACK UP
(Continued)
BACK
(use to adjust pump speed)
AUX 4
AUX 5
AUX 6
NONE
NEXT PAGE
MENU/SETP/EQUIP/INTELLIFLO/ASSIGN
BACK
Press this
button to
change RPM
SETTINGS FOR
to GPM
RPM OR GPM
Press this
DISABLE PSI
button
ENABLE (or
Disable)
PSI setting
AUX 4 750 RPM
AUX 5 1500 RPM
AUX 6 2350 RPM
NONE 30 GPM
NEXT PAGE RPM /GPM/PSI
MENU/SETP/EQUIP/INTELLIFLO/ASSIGN
DOWN
UP
Down and Up buttons
750 RPM
1500 RPM
2350 RPM
Press
30 GPM
RPM/GPM/PSI
RPM /GPM/PSI
button
UP DOWN
PENTAIR IFLO VSF+SVRS #3
NONE
30 GPM
MAXIMUM PRESSURE SETTING
10 PSI
BACK DOWN UP
SAVE
Press right
side circuit
button to set
the pump
speeds
(RPM) or flow
rates (GPM)
Press this
button to
adjust PSI
(1-30)
setting