Chlorine Generator; Activating The Chlorinator; Adjusting The Chlorine Output Level - Intellitouch User Manual

54

Chlorine Generator

The IntelliTouch system is designed to operate with the following salt chlorine generators:
• Pentair Water Pool and Spa
• GoldLine Aqua Rite®
Clear Tech Automation AutoClear
•
• AutoPilot Pool Pilot
Note: Call your manufacturer for compatibility with IntelliTouch systems.

Activating the Chlorinator

For IntelliTouch to control and operate the chlorinator, first enable the chlorinator from the IntelliTouch Indoor
Control Panel. If the chlorinator control is enabled, the controls on the chlorinator are disabled and can only be
operated by IntelliTouch. When the chlorinator control is disabled from IntelliTouch, the chlorinator will still be
running but must be controlled at the chlorinator control panel.
Getting There
MENU SETUP EQUIPMENT CHLORINATOR
Go to the Chlorinator screen.
To view the chlorination status and adjust the spa or pool
chlorination level:
• STATUS: Displays the current chlorinator operating
condition. If a problem occurs with the chlorinator, an
error codes will be displayed on the status line.
• WATER SALT LEVEL: Displays how much salt (in
parts per million (ppm) is in the water. See chlorinator
manufacturer's instructions for recommended salt levels.
• SPA / POOL (0 -100%): Displays the current spa and
pool chlorination output level from 0 to 100%.
• CONTROL ENABLED: Press the button next to YES until NO is displayed to disable the
control of the chlorination interface from the Indoor Control Panel.
• To enable or disable the chlorinator: Press the button next to CONTROL ENABLED and select YES to
allow IntelliTouch to control of the chlorinator. Select NO to disable IntelliTouch control. Press Save when
done to return to the Equipment screen.

Adjusting the Chlorine Output Level

In an effort to prevent over chlorination of the spa, the
IntelliTouch system will automatically drop the chlorine
output levels to 1/20th of the current pool output when the
spa is switched on. For example, if the pool output level is
set to 60%, when the spa is switched on, the chlorination
level is reduced to 3%.
• To adjust the spa or pool chlorine output level:
Press the button next to SPA / POOL. Press the (-)
or (+) button to decrease or increase the chlorine
output level (from 0 to 100%) for the spa or pool
water. Press Save when done to return to the
Equipment screen. Press Exit to return to the main
screen.
IntelliTouch Pool and Spa Control System User's Guide
® ®
IntelliChlor
®
Plus
®
Digital
MODEL NAME HERE
STATUS OK - NO ERRORS
WATER SALT LEVEL
SPA 0% POOL 50%
CONTROL ENABLED
MENU/SETP/EQUIP/INTELLICHLOR
SUPER
CHLOR
BACK
- SPA 0%
- POOL 50%
MENU/SETUP/EQUIP/CHLOR/OUTPUT
BACK
Spa and Pool Chlorine Output Level Screen
2900 PPM
YES
EXIT
+
+
EXIT