Section 1 - Intellitouch System Overview; Introduction; Intellitouch System Overview; In The Home - Intellitouch User Manual

Introduction

Welcome! Your Pentair Water Pool and Spa
change the way you view pool and spa controls. This innovation in pool and spa automation offers complete
freedom for you while having full automation control over your pool, spa, lights, heater, pump, cleaners, laminars
and much more. You can now schedule multiple start and stop times to control your lights, heater, spa jets, and
filter pumps. Using the IntelliTouch Indoor Control Panel or MobileTouch
your pool, spa, and lights from anywhere inside or outside your home. Optional controllers are also available
such as the wireless digital tablet and the in-wall touch screen that can interface with your PC. IntelliTouch is a
scalable system that can be upgraded to a completely integrated home automation solution including audio,
security, climate, irrigation and more. For more information about using these interfaces, refer to the IntelliTouch
®
ScreenLogic Interface Accessory Kits on page 5.
IntelliTouch System
An IntelliTouch system can include five (5) to 40 high voltage relays circuits that can be used to control any
combination of pumps, lights, water features. A maximum of ten (10) relays can be housed in an IntelliTouch
Load Center or Power Center. Up to three (3) Load Centers or Power Centers can be connected to a main
Load Center for a maximum of 40 relays. User-configurable circuits can be used to control equipment. The
"Feature Macro" circuits feature allows any number of circuits to be combined and controlled by a single
button.
An optional IntelliTouch Dimmer Module (P/N 520406) can be installed for use to dim any high voltage
incandescent light such as Pentair Water Pool and Spa
lights. The dimmer module supports multiple lights from 100 watts up to 1,000 watts and installs in a standard
relay location. Any number of dimmers (up to 10 maximum) may be used with a maximum combined load of
4,000 watt in a single Load Center.

In the home

The IntelliTouch system can utilize multiple wired and wireless controllers including the wired in-wall touch
screen, indoor control panel and the wireless MobileTouch
PC can also be used to control the IntelliTouch system via the ScreenLogic interfaces. A maximum of four (4)
ScreenLogic interfaces can be used, for example, four tablets or four in-wall Touch Screen's, or four PC's in
any combination.

Around the pool

The IntelliTouch iS10, SpaCommand
functions, including IntelliFlo
pump speed.

At the equipment pad

The pool pump, filter, and various IntelliTouch remote controllers and interfaces are connected to the
IntelliTouch Load Center and/or Power Center enclosure which are located at the equipment pad. The Load
Center enclosure is where the high voltage lines from the circuit breaker panel junction box at the home are
connected to. The pool service person can periodically check pool operations from the Load Center. Also at
the equipment pad there are system pool and spa pipes connected to the pump, heater and filtration system.
Mounted on top the valves are motorized valve actuators used to automatically change the direction flow of
water through the plumbing system. There are also temperature sensors and a cable that connects to the heater.
("Pentair") IntelliTouch Pool and Spa and Control System will
®
™
or iS4 spa-side remote provide control buttons for various pool and spa
® VF 3050, IntelliFlo VS 3050, IntelliFlo VS+SVRS and IntelliFlo VSF +SVRS
IntelliTouch
®
wireless control panel you can control
® Amerlite ® and Pentair Water Pool and Spa
®
wireless remote control panel. Your existing home
IntelliTouch Pool and Spa Control System User's Guide
Section 1
®
System Overview
® SpaBrite
1
®