Manually Playing Back Pages 1 Through 4; Review; Creating A Loop - High End Systems High End LCD Controller for Studio Color User Manual

Manually Playing Back Pages 1 Through 4

1. Use the Page
shown below:
2. The fixture(s) programmed for page 1 should now display the
color and position you selected for them.
3. Press the Page
fixture(s) programmed for page 2 should now display the
color and position you selected for them. Do the same for
pages 3 and 4.

Review

You have now created and manually played back a simple
four-page program. The next sections show you how to
create a loop out of those four pages and then how to record
that loop or any of the pages in the loop as a preset.

Creating a Loop

A loop is a sequence of consecutive pages that continually
plays back until you stop it.
Normally, you create a loop by bracketing the pages on either
side of the loop by un-initialized pages; however, since the
first page in this sample loop is page 1, only one un-
initialized page is required.
1. Use the Page
1, page 5.
2. Press the
Studio Color LCD Controller Programming Guided Tour
and
<Up> <Down>
arrow key to select page 2. The
<Up>
and
<Up> <Down>
key; it flashes.
<Select>
arrow keys to select page 1, as
arrow keys to select memory
4
4-7