Accessing Default Definitions - High End Systems High End LCD Controller for Studio Color User Manual

Accessing Default Definitions

This section describes how to access the six default User key
definitions after any or all of these keys have been redefined
as macros.
Note You can restore all six User keys to their original pre-
programmed state by erasing all User keys. See the
section titled "Erasing All User Keys" on page 6-14.
1. Select
arrow key.
<Down>
2. The LCD display appears as shown below:
3. Select the desired option with the Cursor
arrow keys, then use the Construct
keys to enable or disable the option.
4. To complete the operation, press the
blinking message on the LCD display reminds you this
function is enabled.
The sample LCD display above appears when you enable
random advance. The words
remind you the feature has been enabled.
5. Use the same procedure to disable the function.
Studio Color LCD Controller
from the Main menu, then press the Cursor
and
<Right>
and
<Up> <Down>
key. A slowly-
<Menu>
blink slowly to
User Key Macros 6-13
<Left>
arrow
6