10. Now see one of the following sections:
•
"Backing Up (Downloading) Memory to the Computer"
on page 7-17
•
"Restoring (Uploading) Memory from Computer to
Controller" on page 7-20
Backing Up (Downloading) Memory to the
Computer
Before following this procedure, you must have already
followed the instructions in the following sections:
•
"Connecting the Computer and Controller" on page 7-14
•
"Initial Setup" on page 7-15
1. Use the
<Up>
Controller->Computer option from the main menu, as
shown below, then press
Lightwave Research Backup, Ver. 2.0, Copyright 1992
Figure 7-5. The Controller->Computer option backs
up (downloads) memory from the controller to your
computer.
Studio Color LCD Controller
and
<Down>
<Enter>
Help
Controller -> Computer
Computer -> Controller
Setup
Exit
Press F1 at any time for help.
arrow keys to select the
.
IBM-Compatible 7-17
7