Setting Up The Software; Setup Summary; White Knight V11.14 Setup Procedure - High End Systems High End LCD Controller for Studio Color User Manual

3. Connect the Mac-to-modem cable to the DB25 end of the
adapter. See Figure 7-7:
Modem/printer port
Figure 7-7. Connecting a Macintosh to the
controller for download/upload.

Setting Up the Software

You must follow the procedure in this section before either
backing up controller memory to your computer, or restoring
memory from the computer to the controller.

Setup Summary

The detailed procedure that follows is based on White Knight
only; if you have another communication program, make sure
you set it for all of the following:
• 9600 baud
• 8 data bits, 1 stop bit
• Ignore parity
• Full duplex
• VT100 terminal emulation

White Knight v11.14 Setup Procedure

The procedure that follows is based on White Knight v11.14.
Consult the documentation provided with your copy of White
Knight if you are using a different version.
Make sure you have already connected the cabling as
Studio Color LCD Controller
Mac-to-modem
cable
Controller RS-232C port
DB25 (female) to
DB9 (male) adapter
Macintosh 7-25
7