Initial Setup
You must follow the procedure below backing up controller
memory to a personal computer, or restoring pages,
memories and presets from a personal computer to the
controller.
1. Toggle the controller's
comes ON.
2. If you are currently running Windows, exit to a DOS prompt.
3. Insert the backup diskette shipped with the controller into
your computer's floppy diskette drive. Type one of the
following commands, followed by
A:LWBACKUP
B:LWBACKUP
4. If an error message appears notifying you that a serial port
cannot be accessed, select the "Ignore" option to continue.
5. The Lightwave Research Backup main menu then appears:
Lightwave Research Backup, Ver. 2.0, Copyright 1992
Figure 7-3. Lightwave Research Backup main
menu.
Studio Color LCD Controller
<Standby>
Help
Controller -> Computer
Computer -> Controller
Setup
Exit
Press F1 at any time for help.
key until the Standby LED
:
<Enter>
IBM-Compatible 7-15
7