High End Systems High End LCD Controller for Studio Color User Manual page 99

You can record over an un-initialized page with a
programmed page at any time.
Note The controller automatically places an un-initialized
"page" between pages 99 and 1, as shown in Figure
4-4. So if the first page of your loop is page 1, you
need to create one un-initialized page after the last
page of your loop. If the last page of your loop is
page 99, you need to create one un-initialized page
before the first page of your loop.
Figure 4-4. The controller automatically places an
"un-initialized" page before page 1 and after page
99.
1. Select the first or beginning page that you want to "un-
initialize." This un-initialized page should be the page before
the first page of your loop (unless the first page of your loop
is page 1, in which case a beginning un-initialized page is not
needed).
• Use the Page
page.
• Use the Cursor
memory.
2. Press the
the message on the LCD display.
Studio Color LCD Controller
Page 3
Page 2
Page 1
Un-Initialized Page
Page 99
Page 98
Page 97
and
<Up>
and
<Up>
key. The Select LED flashes. Disregard
<Select>
arrow keys to select the
<Down>
arrow keys to select the
<Down>
Creating a Loop 4-15
4