Erasing A Single User Key - High End Systems High End LCD Controller for Studio Color User Manual

Erasing a Single User Key

To erase one of the User keys, record a zero-keystroke macro
over the old macro using the instructions in this section.
Note Erasing an individual User key does not return it to its
1. Press and hold the User key you wish to erase until
appears on the LCD display, then release the key. The
LCD display then appears as shown below:
2. Select
3. The selected User key's LED flashes, indicating you are
recording.
4. Press and hold the same User key until
the LCD display, then release the key.
5. Select
6. The key stops flashing to indicate you are through recording.
Pressing the User key again displays the following message:
6-12 User Key Macros
default definition. However, you can restore all six
User keys to their default definitions as shown in the
section titled "Erasing All User Keys" on page 6-14.
from the menu.
from the menu.
Studio Color LCD Controller
appears on