Switches B-7 And B-8: Not Used - High End Systems High End LCD Controller for Studio Color User Manual

Switch B-6 On – Independent Presets; the controller behaves
as follows:
• The master intensity recorded in each preset is ignored.
Master intensities will remain as-is during preset
playback. Slave controller master intensity is not
affected or controlled by the master controller. Slave
controllers will each accept independent master dim
settings via Lightwave Show Control protocol.
• Slaved controllers' modulation effects respond to the
audio input of each individual controller. Sequencing
(Auto, Audio 1 and 2) is controlled by the master
controller.
• Each controller uses its local audio input for audio
effects. Advance modes (Auto, Audio 1 and 2) are still
determined by the master controller.
Note Although the intensity setting is not recalled, intensity

Switches B-7 and B-8: Not Used

Switches B-7 and B-8 are not used and should always be set
OFF.
2-8 Setting the Switches
is recorded with presets for compatibility with
Dependent Presets.
Studio Color LCD Controller