High End Systems High End LCD Controller for Studio Color User Manual page 181

6. Press and hold the
controller's front panel until the LCD display shows the
following message:
7. The Lightwave Research Backup menu should now display
an identical message.
• If so, press Y on your computer's keyboard.
• If not, you have not selected a file to store the backup.
Repeat the previous steps.
8. The next menu shows which drive, directory and file you will
back up to.
• If the displayed information is correct, press the
key on the controller's front panel to begin the download.
• If the displayed information is incorrect, press
your computer and start the procedure over.
9. The controller's LCD display appears similar to the following
while the download is taking place. The controller backs up
every page of every memory, including unprogrammed pages
and all locked memories:
Note To stop the download at any time, press the
key on your computer's keyboard, then press the
<Select>
10. The controller display returns to normal and a message is
displayed on the Lightwave Backup software menu when the
transfer is complete.
Studio Color LCD Controller
key (about 10 seconds) on the
<Record>
key on the controller's front panel.
IBM-Compatible 7-19
<Record>
on
<ESC>
7
<ESC>