High End Systems High End LCD Controller for Studio Color User Manual page 178

6. The menu shows the currently-selected option in reverse
video; in Figure 7-3, the selected option is Help.
7. Use your computer's
Setup and press
8. The Setup pop-up menu prompts you to select a COM (or
serial communication port) for the backup program to use.
Lightwave Research Backup, Ver. 2.0, Copyright 1992
Figure 7-4. Selecting a COM (serial
communication) port to use.
9. When you start the backup program, it always defaults to
COM 1 (serial communication port 1). Typically, Windows
uses COM 1 for the mouse so you would need to select
another serial port for the backup.
To use another serial port for backing up or restoring the
controller's memory, type in the number, from 1—4, of that
port. After entering a port number, press
For example, to use COM 3, type 3 and
Caution
7-16 IBM-Compatible
<Up>
<Enter>
Help
Contro
Currently using COM port 1
Compu
Setup
Press 1—4 to change COM port
Exit
or ESC for main menu.
Press F1 at any time for help.
Entering an incorrect COM port will
prevent data from being transferred.
Consult your computer's documentation
to confirm the COM port.
and
<Down>
.
Studio Color LCD Controller
arrow keys to select
.
<Enter>
.
<Enter>