Page Copy
Use page copy to copy the entire contents of a programmed
page to any other page in any other memory. This is useful
for creating additional pages that contain only slight changes,
such as movement changes or single-parameter changes.
Before continuing, make sure your controller is ready for
programming as shown in Figure 4-1 on page 4-3. Also,
make sure you have programmed at least one page.
1. Select the page (source) that you want to copy from using the
Page
<Up>
2. Press the
below:
3. Select the destination memory and page you want to copy the
contents of the current page to:
•
Press the Cursor
the memory number.
•
Press the Page
the page number.
When you press the Cursor or Page key for the first time, the
LCD display appears similar to the one shown below:
The LCD display above would copy the contents of memory
1, page 5 to memory 2, page 1.
4. Press the
Studio Color LCD Controller
and
arrow keys.
<Down>
key. The LCD display appears as shown
<Select>
<Up>
and
<Up>
key to complete the page copy.
<Record>
and
arrow keys to change
<Down>
arrow keys to change
<Down>
Page Copy 4-13
4