Table of Contents
Advertisement
Appendix C
Pinouts and Wiring
Diagrams
This Appendix lists connector pinouts and shows how to wire
various types of cabling you can use to back up and restore
controller memory to a personal computer, or to crossload
memory between controllers.
This Appendix should be used by highly-technical
individuals who are already familiar with how to wire
cabling. Other users should consult the instructions in
Chapter 7.
DTE and DCE Equipment
The RS-232CC port on the rear panel of the LCD controller
is DCE (Data Circuit-Terminating Equipment), while all
other connectors shown in the rest of this Appendix are
DTE (Data Terminal Equipment).
The pinout of the RS-232C port on the LCD controller is
shown in Figure C-1:
Figure C-1. Pinout of the LCD controller's RS-232C
communication port.
Studio Color LCD Controller Pinouts and Wiring Diagrams C-1
5
4
3
2
1
9
8
7
6
Pin #
Definition
1
not used
2
TxD (transmit data)
3
RxD (receive data)
4
Data Terminal Ready (+5V)
5
GND (signal ground)
6
not used
7
not used
8
not used
9
not used
C
Advertisement
Chapters
Table of Contents
