High End Systems High End LCD Controller for Studio Color User Manual page 173

7. Press the
key to cancel. If you press the
appears as shown below:
Caution
8. When the copying is finished the LCD display appears as
shown below:
9. Turn the controller OFF, remove the RAM card and put it in a
safe place.
10. Turn power back ON to continue with the updated operating
system.
11. Write-protect the RAM card as shown in the next section.
Studio Color LCD Controller
key again to continue, or press the
<Erase>
Do not turn controller power off while the
RAM card is transferring information. If
you want to repeat the operation, wait
until it is completed and then turn the
controller's power off.
key, the LCD display
<Erase>
RAM Card: O/S 7-11
<Select>
7