Figure 2-5. The Controller's Addr(Ess) Menu Allows You To Set An Fixture Number From 1-8 So The Controller Will Recognize The Fixture; Figure 2-6. The Fixture Number Display - High End Systems High End LCD Controller for Studio Color User Manual

1. Keep pressing the
menu appears as shown below:
Figure 2-5. The controller's Addr(ess) menu allows you
to set an fixture number from 1—8 so the controller will
recognize the fixture.
2. Press the
It should appear in the format F xx, as shown below:

Figure 2-6. The fixture number display.

Note If the display is not in the format F xx as shown
3. Use the
number if you wish. Do not select a fixture number higher
than 8 (or F 08) because the controller will send only fixture
numbers 1—8.
Note You must select a unique fixture number for each
2-12 Connecting Fixtures
<Menu>
button to view the current fixture number.
<Enter>
above, you must follow the instructions in the next
section, titled "Selecting Fixture Numbering" on page
2-13. Do not continue with this procedure.
and
<Up> <Down>
fixture you wish to respond independently to control
commands. Selecting the same fixture number for
more than one fixture means that all fixtures will
respond to the same set of control commands.
button on the fixture until the
arrow buttons to change the fixture
Studio Color LCD Controller