1. Use your computer's
Computer->Controller from the Lightwave Research
Backup main menu, as shown in Figure 7-6:
Lightwave Research Backup, Ver. 2.0, Copyright 1992
Figure 7-6. Restoring memory from a file stored on
a computer to the controller.
2. The next menu gives you the following options which are
available throughout the rest of the procedure. Use your
computer's
and press
•
Current directory: the top of the menu displays the
current drive and directory (by default, C:\).
•
>>>NEW FILE<<<: Create a new file to back up to.
This file will be located in the current directory.
•
>>>CHANGE DRIVE<<<: Locate the backup file on a
different hard or floppy drive. Type the letter of the
drive you want to store the file on (C, D, etc.).
•
>>>PREVIOUS DIRECTORY<<<: Go up one level
in the directory structure.
•
List of directories on the current drive: A list of the
directories on the current drive (by default, C:\) is
displayed. Use your computer's
keys to select a directory and press
Studio Color LCD Controller
<Up>
Help
Controller -> Computer
Computer -> Controller
Setup
Exit
Press F1 at any time for help.
and
<Up>
<Down>
.
<Enter>
and
arrow keys to select
<Down>
arrow keys to select an option
and
<Up>
<Enter>
IBM-Compatible 7-21
7
arrow
<Down>
.