Setting Master Dim And Playing A Preset (Channel Voice Control); Setting The Channel Number - High End Systems universal Controller User Manual Addendum

Setting Master Dim and Playing a Preset (Channel Voice
Control)
Your selections for the controller's channel number or control number are used for master dim and
preset playing as summarized below:
• Master dim: This is set using the MIDI control change function; it requires both a channel
number and a control number. The master dim level is an absolute value, not a delta (change)
value. The value of 99 corresponds to full brightness; the value of 0 corresponds to off or full
dark. More about master dim as it relates to master/slave modes of the controller is found in
the section titled "Master/Slave Modes" on page 7.
• Playing a preset: A preset can be played back using the MIDI program change function.
Program change requires you to set only a channel number (along with a preset number).
Presets are described in Chapter 4 of the Universal controller manual.

Setting the Channel Number

A channel number is required for both master dim and preset playback.
1. Power ON the controller or press the
below:
2. Press the button, then use the arrow keys around the
<Menu>
menu option (it will blink).
3. Press the Adjust 1 <Down>
different depending on whether Show Control or Channel Control has been previously saved.
Do one of the following:
• If Channum is one of the displayed options, use the arrow keys around the
to select Channum (it will blink). Then see Step 5.
• If Channum is not displayed, use the arrow keys around the
Control menu option if it is not already blinking. Then see Step 4.
4. Press the Adjust 1 <Down>
Control. Press the Adjust 1
press . This will save your selection and return you to the Main menu. Start with
<Record>
Step 2.
5. Press the Adjust 1
6. Use the Adjust 1 arrow keys to select the channel number (from 0 to 15) you wish to use, then
press <Record> . The channel number does not need to be unique for this controller.
button to return to the Main menu, shown
<Select>
DIM READY
M
99
arrow key. This displays a list of menu options which will be
arrow key. This displays two options: Show Control and Channel
arrow key to select Channel Control (it will blink). Then
<Down>
<Down> arrow key. This displays the following menu:
MIDI CHANNEL NUM
xxx
Addendum UN-1
PAGE
001
button to select the MIDI
<Menu>
button to select the
<Menu>
button
<Menu>
Page 5