Setting The Device Id - High End Systems High End LCD Controller for Studio Color User Manual

3. Press the Cursor
options shown below:
4. Use the Cursor
, as shown below:
5. Press the Construct
the selection between
6. Use the Cursor
continue with the next section.

Setting the Device ID

The device ID is used by MSC and LSC to identify master
controllers.
• In LSC, ID 0 (zero) means that the device responds to
any ID. For example, if you were to send out commands
to device ID 7 or ID 14 or ID 112, the controller with
device ID 0 would respond. Device ID 0 is the default
setting.
• MSC uses device ID 127 instead of ID 0 to tell a device
to respond to any ID.
Studio Color LCD Controller
arrow key to display the menu
<Down>
and
<Right> <Left>
and
<Up> <Down>
.
arrow key to select
<Left>
Selecting MSC or LSC
arrow keys to select
arrow keys to change
or
5
and
5-9