High End Systems High End LCD Controller for Studio Color User Manual page 189

1. Toggle the
the Standby LED turns ON.
2. Press and hold the
panel until the LCD display appears as shown below:
3. Your computer screen should display the following message:
Save from controller to PC.
Set PC to receive, then press RECORD to begin.
Press SELECT to quit anytime.
4. On your computer, press Command+F+N to start the file
capture. Enter a file name in the Capture File to Save text
field and click Save.
5. Press the
the transfer. The controller's LCD display appears as shown
below while the transfer is taking place:
Note If you use White Knight, at the bottom of your screen
you will see a long series of characters that
increments as data is being sent. This is normal.
6. The controller's LCD display returns to normal when the
transfer is complete. Press the
controller's front panel to stop the download.
7. Press Command+F+C on your computer to end the file
capture.
Studio Color LCD Controller
key on the controller's front panel until
<Standby>
<Record>
key on the controller's front panel to start
<Record>
key on the controller's front
key on the
<Select>
Macintosh 7-27
7