Block Copy (And Reverse) - High End Systems High End LCD Controller for Studio Color User Manual

3. Press the
below:
4. Press the
5. Repeat steps 1 to 4 for the second or ending un-initialized
page. (If the last page of your loop is 99, an ending page is
not needed.)

Block Copy (and Reverse)

Before continuing, make sure your controller is ready for
programming as shown in Figure 4-1 on page 4-3.
Use block copy to copy an entire range (block) of consecutive
pages from one location in memory to another (for example,
you can copy memory 1, pages 1—10 to memory 2, pages
9—18). This function can save time in programs that have
multiple repeating pages with slight parameter changes each
time the loop repeats. Reverse block copy is an option that
reverses the order of the pages you are copying.
1. Use the Page
within the block of pages that you want to copy.
2. Press the
below:
4-16 Block Copy (and Reverse)
key. The LCD display appears as shown
<Erase>
key again to un-initialize the page.
<Erase>
and
<Up> <Down>
key. The LCD display appears as shown
<Select>
arrow keys to select any page
Studio Color LCD Controller