High End Systems High End LCD Controller for Studio Color User Manual page 124

If you are continuing from the previous section, begin with Step 3.
1. Enter the menu system by pressing the
2. Select
3. Press the Cursor
appears as shown below:
4. The LCD display above indicates the controller is currently
set for the default ID of 0.
5. Use the Construct
value of the
and 0 to 126 for MSC.
• In LSC, ID 0 (zero) means that the device responds to
any ID.
• MSC uses device ID 127 to tell a device to respond to
any signal.
6. Press the Cursor
another menu item, or press the Cursor
return to the Main menu.
7. If you selected MIDI Show Control, you must power cycle the
controller. Turn the power OFF then back ON.
5-10 Selecting MSC or LSC
from the Main menu, as shown below:
arrow key. The LCD display
<Down>
and
<Up>
. Values range from 1 to 223 for LSC
and
<Right>
<Menu>
arrow keys to change the
<Down>
arrow keys to select
<Left>
<Up>
Studio Color LCD Controller
key.
arrow key to