High End Systems High End LCD Controller for Studio Color User Manual page 141

6. Select the memory and page (destination) you want to copy
the contents of the current page to:
• Press the Cursor
the memory number.
• Press the Page
the page number.
Note Make sure the page you select does not already
contain a program, because the page would be
erased.
7. When you press the Cursor or Page key for the first time, the
LCD display shows the source memory and page fields. The
destination memory and page fields follow your key presses.
The sample LCD display above will copy the contents of
memory 3, page 1 to memory 5, page 2.
8. Press the
9. Press the User key
display, then release the key. The LCD display then appears
as shown below:
10. Use the Cursor
from the menu, then press the Cursor
key.
11. The User
recorded. Now when you press the User
copy is automatically performed.
Studio Color LCD Controller
<Up>
and
<Up>
key to complete the page copy.
<Record>
until
<7>
and
<Right>
LED goes off, indicating the macro has been
<7>
and arrow keys to change
<Down>
arrow keys to change
<Down>
appears on the LCD
arrow keys to select
<Left>
<7>
User Key Macros 6-11
arrow
<Down>
key, the page
6