10. Use the joystick to position the beam in a different place of
your choosing.
11. Press the
Recording Page 3
1. Press the
2. Press the Page
3. Press
<Record>
4. The controller is now set for memory 1, page 3. Press the
<Select>
5. Press the
6. Press the
<Down>
7. Press the
choice.
8. Use the joystick to position the beam in a different place of
your choosing.
9. Press the
Recording Page 4
Use the same procedure as for recording page 3, making sure
you do all of the following:
1. Select a value of
2. Position the beam in a different place than in page 3.
3. Press
<Record>
4-6
Programming Guided Tour
key to save page 2.
<Record>
key; it flashes.
<Select>
arrow key to select page 3.
<Up>
to complete the page copy.
key; it flashes.
keys of the fixtures you want to program.
<Address>
key, then use the Construct
<Gate>
arrow keys to select
key and select a different color of your
<Color>
key to save page 3.
<Record>
when you're finished.
.
for the Delay construct.
Studio Color LCD Controller
and
<Up>