High End Systems High End LCD Controller for Studio Color User Manual page 89

9. Press the
Address LEDs of all fixture numbers you selected are now
ON. This is because the shutters of these fixtures are open
(you selected
Recording Page 2
You will create pages 2—4 of the sample program using the
controller's page copy feature, which copies constructs and
parameters from one page to another.
1. After recording page 1, the LCD display appears as shown
below:
2. Press the
3. Press the Page
display then appears as shown below:
4. Press
<Record>
5. The controller is now set for memory 1, page 2. Press the
key; it flashes.
<Select>
6. Press the
7. Press the
all construct parameters are now identical for those fixture
numbers on pages 1 and 2. This is the result of the page
copy.
8. Press the
arrow keys to select a different color, or spin speed.
9. Press the
arrow keys to select a value of
Studio Color LCD Controller Programming Guided Tour
key to save page 1. Notice that the
<Record>
for the Gate construct in Step 5.)
key; it flashes.
<Select>
arrow key to select page 2. The LCD
<Up>
to complete the page copy.
keys of the fixtures you want to program.
<Address>
key; notice it is already set to
<Gate>
key then use the Construct
<Color>
key and use the Construct
<Delay>
; in fact,
and
<Up> <Down>
and
<Up> <Down>
.
4-5
4