High End Systems High End LCD Controller for Studio Color User Manual page 156

You can skip the first two steps below if you are continuing
from the previous section.
1. Select
2. The LCD display then appears similar to the one shown
below:
3. Use the Cursor
submaster number as shown below (submaster 1):
4. Press the
that submaster. (You must select only one fixture at a time.)
The selected address LED comes ON to indicate that it is
assigned to that submaster.
5. Press the
changes, or press the
control dimming.
You can assign multiple fixtures to each submaster and you
can also assign any particular fixture to multiple submasters.
6. Continue selecting one fixture at a time for submaster
control. When you're done, press the
your settings.
6-26 Submasters
from the Main menu, as shown below:
and
<Right>
keys of a fixture you want to assign to
<Address>
key to have the submaster control color
<Color>
<Dim>
arrow keys to select the
<Left>
key if you want the submaster to
<Menu>
Studio Color LCD Controller
key to save