Recording A One-Page Preset - High End Systems High End LCD Controller for Studio Color User Manual

Recording a One-Page Preset

1. Use the Construct and Page
select the memory and page you want to record as a preset.
ADDRESS
2. Toggle the
ON. The LCD display then appears as shown below:
PRESET
3. Use the Cursor
of presets. Each bank contains 8 presets.
4. After you have selected a preset bank, press the
5. Press the numbered Preset key (
to store the preset. See Figure 4-5 on page 4-20 for an
explanation of how preset bank numbering works.
6. Optional. If you are using 12-level preset access, follow the
instructions in the section titled "Using Twelve-Level Preset
Access" on page 6-19.
7. Press the
your choice of a preset as shown below:
8. Press the
key to quit without storing the preset.
9. You can now recall this preset by selecting the preset bank
and pressing the Preset key you recorded in Step 7. See the
section titled "Preset Playback" on page 4-23.
Studio Color LCD Controller
<Address>/<Preset>
and
<Right>
key. You are then prompted to confirm
<Record>
key again to confirm or press the
<Record>
and
<Up> <Down>
key until the Preset LED turns
arrow keys to select a bank
<Left>
to ) where you want
<1> <8>
Preset Programming 4-21
arrow keys to
key.
<Select>
<Select>
4