Ram Card: O/S; Backing Up The Operating System To A Ram Card - High End Systems High End LCD Controller for Studio Color User Manual

RAM Card: O/S

This section explains how to back up, replace or update the
controller's operating system from a RAM card.
Note When you are not using a RAM card, you should
Backing Up the Operating System to a RAM
Card
Use this procedure to back up the contents of the controller's
operating system to a RAM card. You might want to do this
before upgrading to a new operating system version, or to
have a copy of the controller's operating system on a RAM
card for safekeeping.
Note One RAM card can contain either a copy of the
1. Insert a RAM card into the RAM card slot on the controller's
front panel. The RAM card is designed to go in the slot only
one way; do not force the card into the slot. If you feel
resistance, turn the card over and reinsert it.
2. Press the
3. Press the Cursor
7-8 RAM Card: O/S
write-protect it to avoid accidental data erasure. See
the section titled "RAM Card: Write-Protection" on
page 7-12.
controller's memory or operating system, but not
both. To back up both the internal memory and
operating system, you will need two RAM cards. See
the section titled "Optional Accessories" on page 1-6
for ordering information.
key to enter the menu system.
<Menu>
<Right>
from the Main menu, as shown below:
and arrow keys to select
<Left>
Studio Color LCD Controller