Remote Preset Access; Setting Up The Controller - High End Systems High End LCD Controller for Studio Color User Manual

Remote Preset Access

Twelve-level preset access and binary preset access allow
you to do one or both of the following:
• Play back individual pages or loops (even individual
pages within loops).
• Play back the same loop with different settings for: auto
advance, audio 1 and 2 advance, random advance, color
modulate or dim modulate.
More detail about each kind of preset access is shown below:
• Twelve-level preset access: Record and play back up to
96 presets (eight presets for each of 12 channels). This is
a "hands-on" method, since you need to first enable an
analog controller channel then press a Preset key on the
Studio Color LCD controller's front panel.
• Binary preset access: Record and play back up to 1023
presets (each of 10 analog channels is a binary digit).
This mode offers the greatest flexibility for total remote,
"hands-off" control since all input is done on the analog
controller.

Setting Up the Controller

Connect the analog controller as described in the section
titled "Analog Inputs Ports" on page 6-15. Set switch B-3 on
the Studio Color LCD controller's rear panel to ON. Then do
one of the following:
• 12-level preset access: Set switch B-5 to OFF.
• Binary preset access: Set switch B-5 to ON.

6-18 Remote Preset Access

Studio Color LCD Controller