High End Systems High End LCD Controller for Studio Color User Manual page 171

4. Press the Cursor
then select
If the message
the LCD display, see the explanation below:
• If there is no card in the RAM card slot, or if the RAM
card is not fully inserted, the message appears:
do not force it into the slot—turn it over if you feel
resistance); the LCD display message changes to:
• If the RAM card's write-protect switch is turned on, the
message appears:
card without removing it from the controller. See the
section titled "RAM Card: Write-Protection" on page
7-12.
5. Press the
contents with the controller's operating system (O/S).
6. After you press the
shown below:
7. Press the
system (O/S) to the RAM card, or press the
cancel without copying.
8. After backing up the operating system, write-protect the
RAM card as shown in the section titled "RAM Card: Write-
Protection" on page 7-12.
Studio Color LCD Controller
arrow key to view the menu options,
<Down>
, as shown below:
Fully insert a RAM card into the slot (but
key to replace the RAM card's current
<Record>
<Record>
key to copy the controller's operating
<Record>
does not appear on
You can unlock the
key, the LCD display appears as
<Select>
RAM Card: O/S 7-9
7
key to