Using The Construct Keys - High End Systems High End LCD Controller for Studio Color User Manual

Construct keys: Allow you to program Studio Color
fixtures. For more information, see the section titled "Using
the Construct Keys" on page 3-8.
Home key: Pressing this key then pressing one or more
home
Address keys closes the shutter and returns the selected
fixtures' wheels and motors to their default (home) positions.
For more information, see the section titled "Homing
Fixtures" on page 4-29.
Joystick: Use the joystick to position the beams of selected
fixtures during beam programming. For more information,
see the section titled "Position Key (POS)" on page 3-19.

Using the Construct Keys

There are 14 Construct keys on the controller's front panel
that allow you to custom program Studio Color fixture
features.
The Construct keys are shown in Figure 3-3. Descriptions of
all keys begin on the next page. Appendix B has a complete
listing of all constructs, their allowed values and their default
values.
Not used
Not used
Note The 4 unlabeled keys are not used by the Studio Color

3-8 Using the Construct Keys




Not used
Figure 3-3. The 14 Construct keys control features
of the Studio Color fixture.
LCD controller.
    


   
Not used
Studio Color LCD Controller