4. A summary of all constructs and parameters for that fixture
number appears, similar to the one shown below:
Most fields are self-explanatory; below is a brief description
of some of the fields:
•
: Displays the MSpeed setting.
•
: (Beam position.)
beam has been positioned manually using the joystick. A
value from 1 to 99 appears if a position preset is used
instead. See the section titled "Using Position Presets"
on page 6-3 for more information about using position
presets.
•
The following constructs are displayed in percentages
(0—FF) rather than numerical values (0—255):
(Red-Green-Blue); and
All of the possible values that can be displayed for the
(Color) construct are listed in Appendix B.
4-26 Viewing Fixtures
as shown above, indicates the
(Lens 1, Lens 2).
Studio Color LCD Controller