Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
Advertisement
Table of Contents
Related Manuals for High End Systems universal Controller
Summary of Contents for High End Systems universal Controller
- Page 1 ENABLE select record erase L I G H T W AV E User Manual Addendum ® ® High End Systems, Inc. 2217 West Baker Lane Austin, Texas U.S.A. S Y S T E M S Version 1.0 p/n 60600067...
-
Page 3: Table Of Contents
(November 1994). The information in this addendum replaces the section titled “MIDI” on pages 4-9 and 4-10 of the Universal Controller manual. Firmware version 2.04 for the Universal Controller introduces expanded MIDI control as a top- level menu option. A summary of changes is listed below: •... -
Page 4: Initial Power-Up Menu
Initial Power-Up Menu After power-up the Universal controller goes through internal self-test routines then displays the Main menu shown below: READY PAGE Pressing the <Menu> button on the controller’s front panel displays the controller’s top-level menu options. There are 12 top-level menu options, listed below:... -
Page 5: Navigating In The Midi Menu System
Navigating in the MIDI Menu System Table 1 below describes the functions of the navigational keys located on the controller’s front panel. Figure 3.1 on page 2-1 of the Universal Controller User Manual shows the location of these keys. Table 1: Universal Controller Navigational Keys... -
Page 6: Setting The Midi Device Id (Msc Control)
Setting the MIDI Device ID (MSC Control) You set the controller’s MIDI device ID using the Show Control menu as described below: Power ON the controller or press the button to return to the Main menu, shown <Select> below: READY PAGE Press the button, then use the arrow keys around the... -
Page 7: Setting Master Dim And Playing A Preset (Channel Voice Control)
Playing a preset: A preset can be played back using the MIDI program change function. Program change requires you to set only a channel number (along with a preset number). Presets are described in Chapter 4 of the Universal controller manual. Setting the Channel Number A channel number is required for both master dim and preset playback. -
Page 8: Setting The Control Number
Setting the Control Number A control number is required only for master dim. Power ON the controller or press the <Select> button to return to the Main menu, shown below: READY PAGE Press the <Menu> button, then use the arrow keys around the <Menu>... -
Page 9: Master/Slave Modes
When the controller is configured as a slave or as neither a master or a slave, it will Thru all MIDI data. The Universal controller does not Merge data. (Remember to take the controller out of the “master” mode when you want to control it from a playback system.) -
Page 10: Selecting Master, Slave Or Neither Mode
Selecting Master, Slave or Neither Mode Power ON the controller or press the button to return to the Main menu, shown <Select> below: READY PAGE Press the button, then use the arrow keys around the button to select the MIDI <Menu>... -
Page 11: Data Format
Data Format This section describes the data format used by the commands described in this addendum. Channel Voice Message Control Control Change—used to set the Master Dim level: 1011nnnn 0ccccccc 0ddddddd where nnnn is the channel number 0 to 15, ccccccc is the control number 0 to 63, ddddddd is the desired Master Dim level 0 to 99. - Page 12 Page 10 Addendum UN-1...