Delay Key - High End Systems High End LCD Controller for Studio Color User Manual

Delay Key

Use this key to set the amount of time you want the controller
to pause on the current page in the loop before advancing to
the next page in the loop. You can select from 0 seconds to
99 seconds, or you can select
page indefinitely until you manually advance (press the Page
arrow key to advance).
<Up>
and 99.
The advance rate set by the
time. Turning the
Delay setting; turning the
adds to the Delay setting.
Note If the controller is using audio advance, the Delay and
For more information about the
titled "Setting Rate and Delay Time" on page 4-18.
3-20 Using the Construct Keys
suppose you have programmed all 99 pages of
memory 9 as position presets. All 99 position presets
are available for fixture number 1, all 99 position
presets are available for fixture number 2, etc.
<Rate>
longer than
Delay setting
Rate settings are ignored.
which will hold on the
is between the settings of 0
knob changes the delay
<Rate>
knob clockwise subtracts from the
knob counter-clockwise
<Rate>
rate
shorter than
Delay setting
knob, see the section
<Rate>
Studio Color LCD Controller