Selecting A Submaster Mode - High End Systems High End LCD Controller for Studio Color User Manual

Selecting a Submaster Mode

There are two submaster modes: Proportional level or
Remote level.
• Proportional Level submasters (typical setting):
Traditional submaster control. The submaster value is
multiplied by the programmed fixture value. For
example, if the recorded dim value for the selected
fixture is at 50 percent and a submaster is at 50 percent,
the fixture will be dimmed at 25 percent.
If there are two or more submasters, the submaster with
the higher setting has control. For example, suppose you
assigned 2 submasters to one fixture. You set submaster
1 at 20 percent dim and submaster 2 at 50 percent dim.
The 50 percent submaster has control because it is the
larger value.
• Remote Level submasters: The device with the higher
level has control. For example, if you program the
fixture for 50 percent dim and the submaster for 60
percent dim, the submaster has control.
1. Select
2. Select
3. Use the Construct
selection.
4. Press the
menu system.
6-24 Submasters
from the Main menu, as shown below:
from the Submasters menu, as shown below:
and
<Up>
key to save your selection and exit the
<Menu>
arrow keys to make a
<Down>
Studio Color LCD Controller