Rear Panel Descriptions - High End Systems High End LCD Controller for Studio Color User Manual

Rear Panel Descriptions

Figure 2-1 shows the locations of the connectors on the rear
panel of the Studio Color LCD controller.
DATA LINK
OUT
Data Link Out
port
Figure 2-1. Connectors on the controller's rear
panel.
Data Link Out port: An XLR female jack that sends
control data to all connected fixtures. For more information,
see the section titled "Connecting Fixtures" on page 2-9.
Personality switches: The four switches in switch block A
are reserved for future use. The eight switches in switch
block B define the controller's modes of operation. For more
information, see the section titled "Setting the Switches" on
page 2-4.
Serial communication port: Standard PC AT
serial communications port conforming to the RS-232C (also
known as EIA-232-D) standard. This port is used for
playback control using Lightwave Control Center (LCC)
software, or for backing up/restoring memories and pages
using a personal computer. The port operates at 9600 baud, 8
data bits, no parity, and 1 stop bit. For more information, see
the section titled "Other Connectors" on page 2-23.

2-2 Rear Panel Descriptions

LIGHTWAVE RESEARCH
2217 West Braker Lane
Austin, Texas U.S.A.
M IDI
IN OUT
SERIAL PORT
PERSONALITY
RS-232
A B
1 2 3 4 1 2 3 4 5 6 7 8
1 2 3 4 1 2 3 4 5 6 7 8
Personality MIDI In/Out
switches ports
Serial
communication
port
IMPORTANT SAFETY INFORMATION. SEE INSTRUCTION MANUAL BEFORE USE.
WICHTIGE SICHERHEITSINFORMATIONEN. BEDIENUNGSANLEITUNG VOR GEBRAUCH LESEN!
D'IMPORTANTE CONSIGNE DE SÉCURITÉ. VOYEZ LE MANUEL D'INSTRUCTION AVANT L'UTILISATION DE L'APPAREIL.
R
CAN/CSA C22.2 No. 950
MODEL
SERIAL
VOLTAGE
DATE
ANALOG INPUTS
1-6 7-12
MASTER SLAVE
REMOTE
ENABLE
Analog inputs
Master/Slave Remote Enable
ports port
Studio Color LCD Controller
This device com pli es with part 15 of the FCC rules.
WARNING
Operation is subject to the following two conditions:
(1) This device may not cause harm ful interferences,
and (2) this device mus t accept any interference
T o reduce t he risk of f ire or that may c ause undesi red operation.
electric shock, do not expose
this device to rain or mois ture.
ETL Listed
CAUTION
Conforms to
UL Std. 1950 C
R
Certified to
To prevent electric shock, do
not remove cover. No user
67501
serviceable parts inside.Refer
servicing to qualified service
Cy berlight LCD Controller
personnel. Replace fuse with
15FM123456
same type and rating.
230 50
HZ
RAT ING IN FO R MAT IO N
V OL T AG E : 11 5V A C/ 23 0V A C
QC CURR ENT : 0. 25A/ 0. 15 A
F RE Q UE NCY : 50 -6 0 HZ
L
R
STEREO
CAUTION
AUDIO
voltage
FUSE
INPUT
select
115 V 0.5 A, SLOW BLOW
230 V 0.315 A, SLOW BLOW
Stereo Audio
input
®
style 9-pin