3. Use the Cursor
from the Main menu, as shown below:
4. Press the Cursor
then use the Cursor
5. Press the
the controller, or press the
from the RAM card.
6. After pressing the
shown below:
7. Press the
press the
restarts after memory has been restored.
8. After memory has been restored, the controller is
automatically placed in mirror mode, causing subsequent
programming to be recorded to both the RAM card and to the
controller's memory.
•
If you wish to use mirror mode, leave the RAM card in
the slot.
•
If you do not wish to use mirror mode, write-protect the
RAM card as shown in the section titled "RAM Card:
Write-Protection" on page 7-12, then remove the RAM
card and put it in a safe place.
Studio Color LCD Controller
and
<Right>
arrow key to view the menu items,
<Down>
<Right>
, as shown below:
key to load the contents of the RAM card to
<Erase>
<Menu>
<Erase>
key again to begin the load operation, or
<Erase>
key to cancel the operation. The controller
<Select>
arrow keys to select
<Left>
and
arrow keys to select
<Left>
key to exit without loading
key, the LCD display appears as
RAM Card: Memory 7-7
7