Figure 3-4. Factory Configuration Of The Studio Color Fixed Color Wheel; Lens 2 Key - High End Systems High End LCD Controller for Studio Color User Manual

The display below selects a color between the half-color
combination 2 and 3 (3/4 CTO and Pink) and position 3:
See also "CSpeed" on page 3-21.
The factory configuration of the color wheel is shown below:
Figure 3-4. Factory configuration of the Studio
Color fixed color wheel.

Lens 2 Key

See also "Lens 1 Key" on page 3-11. The two Studio Color
effects wheels are controlled by the Lens 1 and Lens 2
constructs. Each wheel has four positions (three effects plus
open). The three effects positions include beam shaping plus
one other effect. Construct values of 0 and 255 select the
open position; the other positions are described below.
3-16 Using the Construct Keys
3
Pink
4
Magenta
5
Red
2
¾ CTO
1
Open
6
Aqua
Studio Color LCD Controller