Navigating The Menus; Summary; Getting Started - High End Systems High End LCD Controller for Studio Color User Manual

Navigating the Menus

This section explains how to use the menu system. More
information is contained in subsequent sections in this
chapter.

Summary

• Press the
If you're in the menu system, pressing the
takes you completely out of the menu system, no matter
cursor
where you are, saving the options you selected.


  
• Press the Cursor
and down through the menu system one level at a time.
• Use the Cursor
between menu options.
construct
• Typically, you use the Construct
keys to change parameter values; a message appears in
the LCD display telling you if another key is required.
• You also use the Construct
to scroll through pages on multi-page screens.

Getting Started

Upon powering up the controller, after its power-on self-test
successfully completes, the LCD display appears as shown
below:
Press the
display then appears as shown below. This is referred to as
5-4

Navigating the Menus

key to enter and exit the menu system.
<Menu>
<Up>
<Right>
key to access the menu system. The LCD
<Menu>
and arrow keys to move up
<Down>
and arrow keys to move
<Left>
<Up>
and
<Up> <Down>
Studio Color LCD Controller
key
<Menu>
and arrow
<Down>
arrow keys