Figure 2-18. Locations Of The Power Key Switch, The - High End Systems High End LCD Controller for Studio Color User Manual

3. Insert the controller power key into the controller's front
panel power key switch and turn the key clockwise. The
location of the key switch is shown in Figure 2-18.
Studio Color
ADDRESS
PRESET
STANDBY
slave
POWER
LIGHTWAVE
Standby key
and LED

Figure 2-18. Locations of the power key switch, the

<Standby> key and Standby LED.
Caution
4. The LCD window briefly shows the Boot version number and
all LEDs flash. In a moment the Standby, Address, and any
initialized or programmed Address/Preset LEDs light.
5. If a RAM card containing memory (memories, pages, presets,
etc.) is inserted in the slot, the contents of the RAM card are
checked against the contents of memory.
• If the contents of memory and the RAM card match, the
controller is placed in mirror mode and all future
programming is automatically copied to the card.
Studio Color LCD Controller Powering On the Controller 2-27
INTENSITY
1 2 3 4
construct
7 8
5 6
 
       


    
MEMORY CARD
Power key switch
Do not touch the joystick when applying
power to the controller; the controller
uses the initial position of the joystick as a
reference point.
MEMORY PAGE
cursor
page


  
 
home

select record erase
USER
1 2
3 4
5 6
7 8
ADVANCE
auto
level
audio
rate
2