Erasing All User Keys
Erasing all User keys deletes any custom macros you have
programmed and returns the eight User keys to their default
definitions. (Memories, pages, presets, submasters, menu
choices and the controller's operating system are not
affected.) For more information about User keys, see the
section titled "User Key Macros" on page 6-9.
1. Select
2. Select
3. Press and hold the
Do not release the
appears as shown below:
4. While still holding the
again. (Press either
erasing the User keys.)
6-14 User Key Macros
from the Main menu, as shown below:
from the Setup menu, as shown below:
<Select>
<Select>
<Select>
<Select>
key, then press the
key. The LCD display then
key, press the
or
to exit without
<Menu>
Studio Color LCD Controller
key.
<Erase>
key
<Erase>