However, the Studio Color fixture has several built-in
random (or unsynchronized) effects which work
randomly even if multiple fixtures are assigned the
same fixture number. For more information, see the
section titled "Programming Hints" on page 3-2.
4. Press the
continue with the section titled "Cables and Terminators" on
page 2-14.
Selecting Fixture Numbering
The Studio Color LCD controller requires each fixture to be
assigned a fixture number rather than a DMX address, so if
the display as shown in Figure 2-6 indicates the fixture is
currently set for DMX address, you must change it using the
procedure below:
1. Keep pressing the
display shows ADDR as shown in Figure 2-5 on page 2-12.
2. Use the
<Up>
shown below:
Figure 2-7. The Set menu allows you to change various
fixture parameters, including how fixtures are addressed.
3. Press the
buttons to select CHNL as shown below:
Figure 2-8. The CHNL menu option selects either DMX
addressing or fixture number "addressing".
Studio Color LCD Controller
button to save the fixture number and
<Enter>
<Menu>
and
arrow buttons to select SET as
<Down>
button, then use the
<Enter>
button on the fixture until the
and
<Up>
Connecting Fixtures 2-13
2
arrow
<Down>