Assigning A Channel For Master Dim; Assigning Fixtures To A Submaster - High End Systems High End LCD Controller for Studio Color User Manual

Assigning a Channel for Master Dim

This section explains how to use a submaster as the "master
dim controller". Once you assign a channel for master dim,
the same channel cannot be used to control fixtures. For
example, if you select channel 1 for master dim, you cannot
use channel 1 to control fixtures.
Note When the master dim is assigned to a channel, you
should not use the Studio Color LCD controller for
master dim control; master dim should be controlled
by the submaster "master dim controller".
1. Select
2. Press the Cursor
appears similar to the one shown below:
3. Use the Construct
channel for master dim. Remember that the channel you
assign to master dim cannot also be assigned as a submaster.
4. After you set the channel for master dim, you can assign
submaster channels as shown in the next section.

Assigning Fixtures to a Submaster

To have a particular submaster control the dimming or color
of a particular fixture(s), you have to assign that fixture(s) to
that submaster. There are 12 submasters available (or eleven
if you assigned one channel to master dim).
Studio Color LCD Controller
from the Main menu, as shown below:
arrow key. The LCD display then
<Down>
and
<Up> <Down>
arrow keys to select a
Submasters 6-25
6