Selecting Master, Slave Or Neither Mode - High End Systems universal Controller User Manual Addendum

Selecting Master, Slave or Neither Mode

1.
2.
3.
4.
5.
6.
7.
Page 8
Power ON the controller or press the
below:
Press the button, then use the arrow keys around the
<Menu>
menu option (it will blink).
Press the Adjust 1 arrow key. This displays a list of menu options.
<Down>
Use the arrow keys around the
Press the Adjust 1 arrow key. This displays a menu similar to the one shown below:
<Down>
MASTER
The menu above configures the controller as neither a master nor a slave. Do one of the
following:
• If you wish to configure the controller as neither a master nor a slave, press the
button to save this selection and return you to the Main menu.
• Press the and
<Right> <Left>
Slave (your selection will blink).
• Press the Adjust 1 <Down>
to select "yes".
When you have configured your controller as master, slave or neither, press the
button to save this selection and return you to the Main menu.
button to return to the Main menu, shown
<Select>
DIM READY PAGE
M
99 001
button to select the M/S option (it will blink).
<Menu>
SLAVE
no no
arrow keys beside the Menu button to select either Master or
arrow key to select "no" or press the Adjust 1
Addendum UN-1
button to select the MIDI
<Menu>
<Record>
<Up> arrow key
<Record>