Basic System Configuration And Debugging; Basic System Configuration - H3C S5600 SERIES Operation Manual

2

Basic System Configuration and Debugging

When configuring basic system configuration and debugging, go to these sections for information you
are interested in:

Basic System Configuration

Displaying the System Status
Debugging the System
Basic System Configuration
Perform the following basic system configuration:
To do...
Set the current date and time of
the system
Set the local time zone
Set the name and time range of
the summer time
Enter system view from user
view
Set the system name of the
switch
Return from current view to
lower level view
Use the command...
clock datetime HH:MM:SS
{ YYYY/MM/DD |
MM/DD/YYYY }
clock timezone zone-name
{ add | minus } HH:MM:SS
clock summer-time
zone_name { one-off |
repeating } start-time
start-date end-time
end-date offset-time
system-view
sysname sysname
quit
2-1
Remarks
Required
Execute this command in user
view.
The default value is 23:55:00
04/01/2000 when the system
starts up.
Optional
Execute this command in user
view.
By default, it is the UTC time zone.
Optional
Execute this command in user
view.
When the system reaches the
specified start
automatically adds
specified offset to the current
time, so as to toggle the system
time to the summer time.
When the system reaches the
specified end
automatically subtracts
specified offset from the current
time, so as to toggle the
summer time to normal system
time.
—
Optional
By default, the name is H3C.
Optional
If the current view is user view, you
will quit the current user interface.
time, it
the
time, it
the